Discovery Mechanisms
Depending on the values provided in input/provision_config.yml
, target nodes can be discovered in one of three ways:
switch_based
Omnia can query known switches (by SNMPv3 username/password) for information on target node MAC IDs.
Pros
The whole discovery process is totally automatic.
Admin IP, BMC IP and Infiniband IP address configuration is automatic on the target nodes.
Re-provisioning of servers will be automatic.
PXE booting servers is supported via split ports on the switch.
Cons
Users need to enable IPMI on target servers.
Servers require a manual PXE boot after the first run of the provision tool.
For more information regarding switch-based discovery, click here
mapping
Manually collect PXE NIC information for target servers and manually define them to Omnia using a mapping file using the below format:
pxe_mapping_file.csv
SERVICE_TAG,HOSTNAME,ADMIN_MAC,ADMIN_IP,BMC_IP
XXXXXXXX,n1,xx:yy:zz:aa:bb:cc,10.5.0.101,10.3.0.101
XXXXXXXX,n2,aa:bb:cc:dd:ee:ff,10.5.0.102,10.3.0.102
Pros
Easily customized if the user maintains a list of MAC addresses.
Cons
The user needs to be aware of the MAC/IP mapping required in the network.
Servers require a manual PXE boot if iDRAC IPs are not configured.
For more information regarding mapping files, click here
bmc
Omnia can also discover nodes via their iDRAC using IPMI.
Pros
Discovery and provisioning of servers is automatic.
Admin, BMC and Infiniband IP address configuration is automatic on the control plane.
LOM architecture is supported (including cloud enclosures: C6420, C6520, C6620).
Cons
For iDRACs that are not DHCP enabled (ie Static), users need to enable IPMI manually.
For more information regarding BMC, click here
If you have any feedback about Omnia documentation, please reach out at omnia.readme@dell.com.