Configuring infiniband switches

Depending on the number of ports available on your Infiniband switch, they can be classified into:

  • EDR Switches (36 ports)

  • HDR Switches (40 ports)

  • NDR Switches (32 ports)

Input the configuration variables into the network/infiniband_edr_input.yml, network/infiniband_hdr_input.yml or network/infiniband_ndr_input.yml as appropriate:

Caution

Do not remove or comment any lines in the network/infiniband_edr_input.yml, network/infiniband_hdr_input.yml or network/infiniband_ndr_input.yml file.

Parameters

Details
enable_split_port

boolean [1] Required

Indicates whether ports are to be split.

Choices:

  • false <- default

  • true
ib_split_ports

string Optional

  • Stores the split configuration of the ports.

  • For EDR and HDR switches, the accepted formats are : comma-separated (EX: “1,2”), ranges (EX: “1-10”), comma-separated ranges (EX: “1,2,3-8,9,10-12”)

  • For NDR switches, the accepted format is: 2/1, 2/2, 3/1

Note

The port prefix IB1 can be ignored when setting this value.
snmp_community_name

string Optional

The “SNMP community string” is like a user ID or password that allows access to a router’s or other device’s statistics.

Default values: public
cache_directory

string Optional

Cache location used by OpenSM
log_directory

string Optional

The directory where temporary files of opensm are stored. Can be set to the default directory or enter a directory path to store temporary files.
mellanox_switch_config

string Optional

List of configuration lines to apply to the switch. # Example:

# mellanox_switch_config:

# - Command 1 # - Command 2

By default, the list is empty.
ib 1/(1-xx) config

string Optional

Indicates the required state of ports 1-xx (depending on the value of 1/x).

Default values: "no shutdown"
save_changes_to_startup

boolean [1] Optional
Indicates whether the switch configuration is to persist across reboots.

Choices:

  • false <- default

  • true

Before you run the playbook

Before running network/infiniband_switch_config.yml, ensure that SSL Secure Cookies are disabled. Also, HTTP and JSON Gateway need to be enabled on your switch. This can be verified by running:

show web (To check if SSL Secure Cookies is disabled and HTTP is enabled)
show json-gw (To check if JSON Gateway is enabled)

In case any of these services are not in the state required, run:

no web https ssl secure-cookie enable (To disable SSL Secure Cookies)
web http enable (To enable the HTTP gateway)
json-gw enable (To enable the JSON gateway)

When connecting to a new or factory reset switch, the configuration wizard requests to execute an initial configuration:

(Recommended) If the user enters ‘no’, they still have to provide the admin and monitor passwords.

If the user enters ‘yes’, they will also be prompted to enter the hostname for the switch, DHCP details, IPv6 details, etc.

Note

  • Currently, Omnia only supports the splitting of switch ports. Switch ports cannot be un-split using this script. For information on manually un-splitting ports, click here.

  • When initializing a factory reset switch, the user needs to ensure DHCP is enabled and an IPv6 address is not assigned.

  • All ports intended for splitting need to be connected to the network before running the playbook.

  • The ib_password remains unchanged on switches that are in split-ready mode.

Running the playbook

If enable_split_port is true, run:

cd network
 ansible-playbook infiniband_switch_config.yml -i inventory -e ib_username="" -e ib_password="" -e ib_admin_password="" -e ib_monitor_password=""  -e ib_default_password="" -e ib_switch_type=""

If enable_split_port is false, run:

cd network
ansible-playbook infiniband_switch_config.yml -i inventory -e ib_username="" -e ib_password=""  -e ib_switch_type=""

  • Where ib_username is the username used to authenticate into the switch.

  • Where ib_password is the password used to authenticate into the switch.

  • Where ib_admin_password is the intended password to authenticate into the switch after infiniband_switch_config.yml has run.

  • Where ib_monitor_password is the mandatory password required while running the initial configuration wizard on the Infiniband switch.

Note

  • ib_admin_password and ib_monitor_password have the following constraints:

    • Passwords should contain 8-64 characters.

    • Passwords should be different from username.

    • Passwords should be different from 5 previous passwords.

    • Passwords should contain at least one of each: Lowercase, uppercase and digits.

  • The inventory file should be a list of IPs separated by newlines. Check out the switch_inventory section in Sample Files

  • Where ib_default_password is the password used to authenticate into factory reset/fresh-install switches.

  • Where ib_switch_type refers to the model of the switch: HDR/EDR/NDR

If you have any feedback about Omnia documentation, please reach out at omnia.readme@dell.com.